TAMIYA 19444 Mini 4WD Beat-Magnum Premium (AR Chassis)

Overall length: 155 mm. The photo shows the kit assembled and painted. [Premium specifications that emphasize speed with large diameter tires and AR chassis] This is a plastic model assembly kit of a high-performance racer that adopts a shaft drive four-wheel drive. The Beat Magnum Premium is a premium version of the Beat Magnum, the fourth machine of one of the main characters of the mini 4WD manga "Bakusou Kyodai Let's & Go!!", Hoshino Go. The front and rear fenders have been made smaller to accommodate the large diameter tires, and the coil springs and dampers for the dragon suspension attached to the cockpit sides appeal to high-performance driving. As befits a high-speed machine, the large rear wing with flaps is a flat type that reduces air resistance. The body color is white. A special metallic sticker tightens the form. The AR chassis is made of metallic gray ABS resin, while the underpanel and diffuser are made of blue low-friction resin. The fluorescent green five-spoke large diameter wheels are fitted with slick tires. [AR Chassis] The AR chassis is not only aerodynamic, but also has all the elements necessary for Mini 4WD racing, such as ease of maintenance, rigidity, and expandability. It is equipped with air intakes for the battery and motor, which efficiently cools the inside of the chassis using the wind while driving, preventing power loss due to heat. It is also equipped with plastic bearings made of low-friction resin, which reduces drive loss and makes the car lighter. The underpanel and diffuser can be removed with one touch, allowing you to replace the battery or motor without removing the body. In addition, a rear skid bar is standard equipment. When passing through hilly courses such as slope sections, the skid bar made of low-friction resin comes into contact with the course surface to control the machine's posture and prevent it from going off the course. It also comes with a 4.2:1 speed gear. [Basic Specifications] ● Length when completed: 155mm ● Width: 97mm ● Height: 47mm ● Motor included ● Assembly is snap-fit type without the need for adhesive [Items to be purchased separately] ● AA batteries x2