โมดูลแปลงไฟ 220v เป็น 5v 2A Hi-link HLK-10M05 Power supply 220v to 5V AC-DC ultra-small isolated

โมดูลแปลงไฟ 220v เป็น 5v 2A Hi-link HLK-10M12 Power supply 220v to 5V AC-DC ultra-small isolated AC-DC 220V to 5V 2A isolating switch power supply module/ step-down module 1. Product features: - Meet UL, CE requirements, - Ultra-thin, ultra-small - All voltage input (AC: 90 ~ 264V) - Low ripple and low noise - Output overload and short circuit protection - High efficiency, high power density - The product is designed to meet the requirements of EMC and Safety Test - Low power consumption, environmental protection, no-load loss 0.1W - 100% load aging and tested. 2. Environment Condition Item Name Technical Criteria Unit Operation Temperature -20+60 Centigrade Store Temperature -40+80 Centigrade Relative humidity 595 % Cooling way Cooling by radiation Atmospheric pressure 80106 Kpa Sea level elevation 2000 m Vibration Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes 3.Electrical Characteristic 1. Input characteristics (test at room temperature 20 C). Item Name Technical Criteria Unit Rated input voltage 100-240 VAc Input voltage range 90-264 VAc Maximum input current 0.2 A Input current surge 10 A maximum input voltage 270 VAc Enter slow start 50 mS Input Low Voltage Efficiency Vin=110VAc,Output full-load69 % Input High Voltage Efficiency Vin=220VAc,output full-load70 % Long-term reliability MTBF100,000 h Load rated output voltage +50.1 VDc Full rated output voltage +50.2 VDc Short-term maximum output current 1200 mA The maximum output current for a long time 1000 mA Voltage Regulation 0.2 % Load Regulation 0.5 % Output ripple and noise (mVp-p) 70 Rated input voltage, full load. Using 20MHz of bandwidth, The load side 10uF and 0.1uF capacitor to be tested. mV Switch overshoot amplitude (Rated input voltage and output load plus 10%)5 %VO Output over-current protection 150-200% of the output maximum load A Output short circuit protection Direct short circuit at the normal output, automatically resume normal operation after a short circuit removal 2. Output characteristics (test at room temperature 20 C). Project Name Technical Criteria Unit Note No-load rated output voltage 50.1 Vdc Full load rated output voltage 50.2 Vdc Short-time maximum output current 2200 mA Long time maximum output current 2000 mA voltage regulation 0.2 % load regulation 0.5 % Output ripple and noise (mVp-p) 50 Rated input voltage, full output load. Using 20MHz bandwidth oscilloscope, Load side and 10uF and 0.1uF capacitors are tested. mV Switching machine overshoot amplitude (rated input voltage, output plus 10% load)5 %V o Output over-current protection 110-150% of maximum output load A Output short circuit protection Direct short circuit in normal output and automatic return to normal operation after removal of short circuit No damage to the whole machine 4.Safety Characteristics: 4.1 Products designed to meet UL, CE safety certification requirements. 4.2 Safety and electromagnetic compatibility Designed with the input of 2A UL certified insurance; PCB board using double-sided copper clad plate production, material for the 94-V0 fire rating level; Safety standards: Compliance with UL1012, EN60950, UL60950 Insulation voltage: I / P-O / P: 2500VAC Insulation resistance :I / PO / P 100M Ohms / 500VDC 25 C 70% RH Conduction and radiation :comply with EN55011, EN55022 (CISPR22) Electrostatic discharge :IEC / EN 61000-4-2 level 4 8kV / 15kV RF radiation Immunity: IEC / EN 61000-4-3 See Application Note 4.3 Temperature safety design At room temperature, the capacitors of this power , the inner surface of the main converter maximum temperature does not exceed 90 C; Shell maximum surface temperature does not exceed 60 C