โมดูลสำหรับชาร์จมือถือ QC4.0 QC3.0 Fast Quick Charger Adapter Board 6V-35V Step Down Buck Converter for Mobile ชาร์จเร็ว

ผลิตภัณฑ์มีขนาดเลํ็ก เหมาะสำหรับงาน DIY - รองรับการชาร์จเร็วหลากหลายโปรโตคอล PD3.0 (PPS) , QC4+/QC4.0/QC3.0, SCP/FCP, VOOC, Apple 2.4A, AFC, DASH, 9V2A dual engine flash charging, PE2.0 - แรงดันไฟเข้า 6 - 35V - ขนาด 50 x 17 x 12 มม. This product is small in size (50*17*12mm), more suitable for users DIY! If you use a 12 volt power adapter, you can quickly charge your phone every day, and you can supply power from the battery. Solar panels. DC wind turbines! One machine dual purpose! Good helper in outdoor/car/long-term power outages, etc. This is not possible with ordinary mobile phone chargers and charging treasures! One at home, one more charging method is more assured! Features: 1. Strong compatibility USB PD3.0 (PPS) Chip : SW3516S *** ไม่รองรับ OnePlus'VOOC FAST CHARGE และ OPPO's DASH FAST CHARGE *** Support for Qualcomm QC4+/QC4.0/QC3.0 Support for Huawei SCP/FCP Support for Apple 2.4A Support for Samsung AFC Support for one plus DASH Support for VIVO 9V2A dual engine flash charging Support for MediaTek PE2.0 2. High efficiency. The external power adopts external MOS tube. The double wire and the iron-silicon-aluminum magnetic ring are used for high efficiency, and the heating is lower under the same charging power! ! ! Double parallel low resistance electrolytic capacitor + 6 1206 ceramic capacitors! Only for higher performance! Perfectly realize Huawei Super Fast Charge 5V4.5A (SCP) 3. Additional configuration 1. Flexible power supply mode The full protocol fast charging module comes standard with red and black power supply lines. If the optional housing is used, the default power supply interface is 5.5mm female socket and comes standard with 5.5 male lines! 2. Wide supply voltage: 6 to 35V! 3. High-performance input anti-reverse connection special MOS tube for anti-reverse connection, although the cost is high, but the effect is far more than the diode, not hot! (the heat is close to zero) 4. With the fast charge status indicator, the blue light is the output indicator, and the red light is the fast charge status indicator! 5. Dual independent current limit 6. Ultra-thin design, optional housing! 50*17*12mm 4. Precautions 1. The outer casing is hand-modified! Be careful with the user who is perfect in the details! The power supply with the case defaults to a 5.5mm plug! 2. For low voltage and high current fast charge, please use the original data line. If you want to measure the charging voltage and current, you must use a low internal resistance type USB meter! Otherwise it will affect the charging current! 3. TYPE_C port is used for output charging; with C-TO-C/TYPE_C male to male double head data cable to charge mobile phone or laptop! 4. OPPO and one plus mobile phone charging with USB port! QC4+/QC4.0/PD3.0 and other protocols have to use TYPE_C port! 5. When the power supply voltage is higher than 21 volts, the C port PD protocol supports up to 20V3A output, and the module is small in size. Please use good ventilation for the notebook with PD charging! 6. When the USB port and TYPE_C port are plugged into the mobile phone at the same time, the dual port is 5V output! **** Chip:3518 รองรับทั้งหมด ***