รีโมทวิทยุบังคับ TX16S Mark II

Specification Item: TX16S Mark II Size: 287x129x184mm Weight: 750g (without battery) Transmission frequency: 2.400GHz-2.480GHz Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280) SD card: 256MB by default, 8GB maximum Antenna gain: 2db (transmit power adjustable) Working current: 400mA Working voltage: 6.6-8.4v DC Radio firmware: EdgeTX Module Firmware: Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS) Channels: Up to 16 channels (depending on the receiver) Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272 Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor Module Bay: JR compatible module bay Upgrade method: Supports USB-C online / SD card offline upgrade Support EdgeTX and OpenTX EdgeTX is installed by default (Touch screen enabled). * Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later. RadioMaster TX6S Mark II Radio Available in 4in1 and ELRS versions Here are the tips for you to choose 4in1 or ELRS, reviews by OscarLiang "If you can’t decide between ELRS and 4in1, I’d probably go for the ELRS version. It’s going to be the major RC protocol in the near future as it’s so powerful and affordable, with a wide range of tiny and inexpensive ELRS receivers available. One reason to get the 4in1 is if you only want to use other protocols such as Frsky D8/D16, but these are kind of obsolete and slowly phasing out. Or if you are buying an external ELRS module for the radio, then it also makes sense to get the 4in1 as you don’t want to have another ELRS module onboard doing nothing. " FCC Version and EU LBT Version are Available Currently, we provide the standard FCC version and the EU LBT version. Please check the supported protocols below. Standard FCC Version 4in1 (FCC) Version supports all MPM protocols ELRS (FCC) is pre-installed with ExpressLRS ISM FW (Max power is hardware dependant) EU LBT Version 4in1 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT, HoTT LBT and DSMX ELRS LBT (Europe) Version is pre-installed with ExpressLRS CE EU domain LBT FW (Limited to 100mw power output) Optional V4.0 Hall Gimbals and AG01 Gimbals V4.0 Hall Gimbals Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.