ของน่าใช้ มีเรื่องราวให้ค้นพบรู้จัก Buydeestore
UV Liquid Glue ตัวป้องกันหน้าจอกระจกโค้งแบบเต็มหน้าจอ Samsung Galaxy S20 Ultra S10 S8 S9 Plus S7 edge Note 20 10 Plus 8 9
Mobile & Gadgets

UV Liquid Glue ตัวป้องกันหน้าจอกระจกโค้งแบบเต็มหน้าจอ Samsung Galaxy S20 Ultra S10 S8 S9 Plus S7 edge Note 20 10 Plus 8 9

เช็กราคาล่าสุดที่ร้านค้า

ราคา โปรโมชั่น และตัวเลือกสินค้าอาจเปลี่ยนแปลงที่ร้านค้าปลายทาง

ดูราคาและโปรโมชั่นล่าสุด

เราอาจได้รับค่าตอบแทนเมื่อมีการซื้อผ่านลิงก์นี้ คุณทำรายการซื้อขายกับร้านค้าปลายทางโดยตรง

สินค้านี้ตรงใจไหม?

บอกเราเพื่อช่วยปรับสินค้าที่แนะนำให้เหมาะกับคุณมากขึ้น

ข้อมูลสินค้าในที่เดียว อ่านประสบการณ์ก่อนเลือก เช็กเงื่อนไขจากร้านค้า

รู้จักสินค้านี้

Features: 100% Brand New and High Quality Screen Protector 9H hardness,HD Clear Tempered Glass Film Anti-fingerprint coating,Unrivaled touch sensitivity Easy installation and remove Ultra thin,approx 0.2mm,ultra durable Explosion-proof,Shockproof,Anti-Scratch Package Content: 1*Temepred Glass 1*UV Glue 1*UV Light # UV Liquid Glue # Curved # Full Cover # Tempered Glass # Screen Protector # It should take more patient to install the glass protector: Step 1 : Clean the screen with the wet wipe and cloth and removing any case from you phone Step 2 : Stick the key hole with a label,and then use a knife or scissor open the liquid adhesive box,drop it on the screen(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. ) Step 3 : Peel off the mask film from the glass,then place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important) Step 4 : Wait for about half a minute to let the adhesive spread and level. Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges) Step 6 : Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material. Step 7 : Irradiate the mobile phone under UV lamp and need to illuminate twice for about 3 minutes to reach the fully-cured position. Step 8 : Clear the screen,and turn off the UV lamp for reuse.
เรื่องเล่าจากชุมชน

ประสบการณ์จากผู้ใช้

เขียนรีวิว ↗

รายงานข้อมูลสินค้านี้

เป็นคนแรกที่เล่าประสบการณ์

ชอบอะไร มีข้อสังเกตตรงไหน? เรื่องเล่าของคุณช่วยให้คนอื่นเลือกได้ดีขึ้น