[Avail] SHIMANO Microcast Spool 22ALD22R for 22 ALDEBARAN BFS

Model ◆Microcast Spool 22ALD22R（Spool rim level :2.2mm） Description Microcast spools for the 22 ALDEBARAN BFS series. Replacing the stock spool makes lighter lures easier to handle. It is capable of handling 3-5g lures, which are frequently used in mountain streams, as well as 2g balsaminoes with lightness. Depending on the balance with the rod and line used, it is possible to cast lightweight 1g lures used for light saltwater such as angling and area trout. This product allows you to adjust the brake settings to your preference by using the magnets (sold separately). Please see the detailed installation instructions for the magnets at the bottom of the page. Spec Material Spool section: superduralumin（Coloured by anodising） Shaft part: superduralumin（Hard anodised aluminium） Size Microcast Spool 22ALD22R（Spool rim level2.2mm） Mounting bearing size MicrocastSpool 22ALD22R：8×4×3 Stock bearing size：8×3×2.5 *When replacing bearings, please note the size. Compatibility 22 ALDEBARAN BFS HG LEFT 22 ALDEBARAN BFS XG LEFT 22 ALDEBARAN BFS HG RIGHT 22 ALDEBARAN BFS XG RIGHT Weight MicrocastSpool 22ALD22R/4.7g/70% 22 ALDEBARAN Genuine spools/6.7g/- ・Weight may vary slightly depending on the production lot. ・The weight of both stock spools and our spools includes ball bearings. Line Capacity Microcast Spool 22ALD22R 4Lb/57m 6Lb/38m It was measured using the fluorocarbon line (FluoroValue Star) of Yamatoyo Tegus Co., Ltd. Points to note when using the product Summing with spool rims may cause the anodised aluminium to peel off due to friction. Summing in particular should be carried out on the spool's thread winding surface. When winding line onto the spool, applying too much tension can cause damage. Use a looser tension, especially when coiling stretchy lines such as nylon lines. The bearings are coated with rust-preventive grease at the time of shipment, but please degrease, clean