ของน่าใช้ มีเรื่องราวให้ค้นพบรู้จัก Buydeestore
ANEX Torque Adapter Set for Electrical Work (M3, M3.5, M4, M5, M6) with Case - Over-Torque Prevention and Torque Management
Home & Living

ANEX Torque Adapter Set for Electrical Work (M3, M3.5, M4, M5, M6) with Case - Over-Torque Prevention and Torque Management

เช็กราคาล่าสุดที่ร้านค้า

ราคา โปรโมชั่น และตัวเลือกสินค้าอาจเปลี่ยนแปลงที่ร้านค้าปลายทาง

ดูราคาและโปรโมชั่นล่าสุด

เราอาจได้รับค่าตอบแทนเมื่อมีการซื้อผ่านลิงก์นี้ คุณทำรายการซื้อขายกับร้านค้าปลายทางโดยตรง

สินค้านี้ตรงใจไหม?

บอกเราเพื่อช่วยปรับสินค้าที่แนะนำให้เหมาะกับคุณมากขึ้น

ข้อมูลสินค้าในที่เดียว อ่านประสบการณ์ก่อนเลือก เช็กเงื่อนไขจากร้านค้า

รู้จักสินค้านี้

If there is an item you are looking for that is not on display, please let me know in chat. I will surely find it for you. Other manufacturers are also OK. Please feel free to contact me. For M3.5 (1.1 N·m): "Single item" Size: Total length 75mm Recommended screw size: M3.5 Set torque: 1.1 (N·m) Number of installations: 1 Usable times: Approximately 5,000 times For M5 (2.6 N·m): "Single item" Prevent over-torquing of screws with the set torque Does not damage screws or base materials Suitable for screw tightening and torque management in distribution panels Please use with a replacement handle or drill driver. Impact drivers are not permitted. Recommended drill driver: 7.2V or less Set torque: 2.6N·m (for M5 screws) Accuracy ±10% Overall length: 75mm, Maximum diameter: 12mm Shank size: 6.35mm hexagonal shaft, Tip attachment size: 6.35mm hexagonal shaft Calibration certification is available for a fee (please contact the retailer for more information) Note: The set torque value is intended for use in distribution panels, so it may not be suitable for other applications. For M3 (0.7 N·m): "Single item" or "Individual item" Size: Total length 75mm Recommended screw size: M3 Setting torque: 0.7 N·m Number of installations: 1 Usable times: Approximately 5,000 times For M4 (1.4 N·m): "Single item" or "Individual item" Prevent over-torque of screws with the set torque. It will not damage screws or the base material. Suitable for screw tightening and torque management in distribution boards. Please use with a quick-change handle or drill driver. Recommended drill driver voltage: 7.2V or lower. Set torque: 1.4N·m (for M4 screws), accuracy ±10%. Size: Total length 75mm. Recommended screw size: M4. Number of installations: 1. Usable for approximately 5,000 cycles. For M6 (4.6 N·m): "Single item" or "Individual item" Size: Total length 75mm Recommended screw size: M6 Setting torque: 4.6 N·m Number of installations: 1 Usable life: Approximately 5,000 times
เรื่องเล่าจากชุมชน

ประสบการณ์จากผู้ใช้

เขียนรีวิว ↗

รายงานข้อมูลสินค้านี้

เป็นคนแรกที่เล่าประสบการณ์

ชอบอะไร มีข้อสังเกตตรงไหน? เรื่องเล่าของคุณช่วยให้คนอื่นเลือกได้ดีขึ้น