Universal Audio Teletronix LA-2A Studio Compressor เอฟเฟคจำลอง รุ่นสูง คุณภาพเสียงดี (ProPlugin)

UAFX LA-2A Controls The following controls are available on LA-2A. Peak Adjusts the amount of compression. Turn clockwise for more squish. Gain Adjusts the output level for the compressed signal. This control applies output gain to the compressed signal only (dry signal gain is controlled with the Mix knob). Dry Mix Adjusts the output level of the dry signal, including up to 6 dB of boost. Turn fully counter-clockwise for 100% compressed signal only, with no dry signal. Turn fully clockwise for maximum dry gain (compressed signal gain is controlled with the Gain knob). Mix and Gain Notes Gain and Mix are independent output level controls for the compressed signal and the dry signal. Rotate Mix fully counter-clockwise to hear only the compressed signal. Control the compressed signal level with the Gain knob. Rotate Gain fully counter-clockwise to hear the dry signal only. Use the Mix knob for dry signal gain boost only. Comp / Limit Sets the compression characteristics. COMP: 4:1 ratio, for medium compression LIMIT: 12:1 compression ratio, for hard limiter-like effects Footswitch The footswitch toggles the effect on/off. The LED is lit when the effect is active. The LED changes colors to indicate compressor activity. Green – The compressor is not responding to the signal Yellow – The compressor is moderately responding to the signal Red – The compressor is heavily responding to the signal Bypass mode You can switch between Buffered or True bypass modes using the slider switch on the back of the pedal. Buffer – The pedal’s output is buffered. Use buffered bypass to minimize high frequency loss from long cable runs, and to preserve your tone when you have multiple pedals in series. True – The pedal signal is true bypass when the effect is off. Release You can set the compressor for Stock or Fast Release with the slider switch on the back of the pedal. Stock release allows compressed levels to recover slowly, and has the characteristic squishiness of a classic opto compression circuit. Fast release allows compressed levels to recover more quickly, and can sound more transparent or less effected. Inputs ¼” unbalanced TS Outputs ¼” unbalanced TS Input impedance 1 Megohm Output impedance 500 Ohms Maximum input level 12.2 dBu Maximum output level 12.1 dBu Frequency response 20 Hz to 20 kHz, ±1 dB USB Type-C For registration and firmware updates via computer Dimensions (with knobs and protrusions) Height: 2.56 inches, 6.5 cm Width: 3.62 inches, 9.2 cm Depth: 5.55 inches, 14.1 cm Weight (unboxed) 0.62 lbs 0.28 kg ส่งฟรีทั้งร้าน ไม่มีขั้นต่ำ ไม่ต้องใช้โค้ดส่วนลด สินค้ารับประกันศูนย์ไทย 1 ปี (1 Year Warranty) ภายใน 15 วัน สินค้ามีปัญหาจากโรงงานเปลี่ยนตัวใหม่** สินค้าของเเท้ 100 % สามารถออก ใบกำกับภาษี เต็มรูปเเบบได้ มีบริการหลังการขาย ช่วยเหลือ ให้คำปรึกษาโดยผู้เชี่ยวชาญ ตลอดอายุการใช้งาน